SS20
The same high rigidity and gate type structure as in the fully automatic dicer are used. A stable cutting environment is provided by using a structure that is not easily affected by heat contraction or vibration. The maximum workpiece size is Φ 200mm, and the square table specification can handle up to 250 mm square substrates. The use of our originally developed axial mechanism contributes to the speeding up of the X, Y, Z axes and the enhanced throughput. A 1.8 kW rating, high-output spindle is equipped as standard. A broad range of uses from silicon to electronic devices can be supported.
Features
Compact design, φ200mm wafer compatible dicing machine
A wide range of materials are supported, from silicon to difficult-to-cut materials.
When the square table is selected from the special specification, processing of substrates up to 250mm2 can also be supported.
High-performance, high-output spindle equipped as standard
1.8 kW rating, maximum rotation speed of 60 krpm (a 2.2 kW rating high-torque spindle can also be equipped as an option)
Enhanced productivity (throughput)
Increased rigidity + servomotorization of the X, Y, Z axes
Establishment of both a reduced footprint and high throughput
High scalability (the standard specification supports various processing modes)
The feature with multiple workpiece support and an alignment corresponding to the state with multiple workpieces applied to 1 tape frame, and the feature in which the workpiece distortion is detected by the alignment treatment, and the cutting position (Y, θ) is corrected so that the optimal chip is obtained, etc., are equipped as standard.
Software features required for various processing uses are equipped as standard, and a wide range are supported from silicon to electronic component processing.
Operability
A 17-inch touch panel + GUI (Graphical User Interface) are used.
Simply by touching the iconized buttons, straightforward and comfortable operation is achieved.
The device is equipped with an operation system in common with the AD/SS Series whose use is familiar.
Specifications
| Maximum work size | Φ 200 mm, □ 250 mm | |
| Spindle | Number of rotations | 60,000 rpm |
| Maximum blade diameter | Φ 2 to 3 inch (Φ 60 to 80 mm) | |
| Rating output | 1.8 kW | |
| X axis | Cuttable range | 260 mm |
| Fastest speed | 800 mm/sec | |
| Y axis | Cuttable range | 260 mm |
| Fastest speed | 300 mm/sec | |
| Cumulative precision | 0.002 mm/260mm | |
| Z axis | Stroke | 35 mm |
| Fastest speed | 80 mm/sec | |
| Repeatability | 0.001 mm | |
| Θ axis | Rotation range | 380° |
| Specifications | Voltage | 3 Phase AC200 to 220 V ±10 % (Other than the above, compatible with a transformer) |
| Consumed electric power | 4.0 ｋVA（MAX） | |
| Air supply pressure | 0.55 to 0.7 MPa | |
| Average consumed volume of air | 180 L/min (at 0.55 MPa) | |
| Cutting water, other (pressure) | 0.3 to 0.5 MPa | |
| Cutting water, other (maximum flow rate) | 2.0 L/min | |
| Cooling water (pressure) | 0.3 to 0.5 MPa | |
| Cooling water (maximum flow rate) | 1.9 L/min (at 0.3 MPa) | |
| Exhaust flow rate | 5 ㎥/min or more | |
| Dimensions (W x D x H) | 890 mm×1,000 mm×1,560 mm | |
| Weight | 792kg | |
Maintenance
Large access area is secured
Related Products
