
Full Automation of Machine Tool Accuracy Inspection.
●System
Model | L-IM-300A series (1 ax: L-IM-301A、2 axis: L-IM-302A) |
---|---|
Maximum measuring range | Corner cube: 10 m, Plane mirror: 5m |
Optical fiber length | 3 m, 5 m, 10 m standard |
Resolution | Corner cube: 5nm, Plane mirror: 2.5nm |
Maximum response speed | Corner cube: 630mm/s(Special order: 1000 mm/s) Plane mirror: 315mm/s |
Accuracy | ±(L×0.6×10-6+5×10-9)m ※L=measuring legth(m) |
Number of axes | 2 max. |
Number of measurement points |
Up to 3 axes, measured sequentially |
---|---|
Connection to NC Unit | RS-232C, Ethernet(FANUC FOCAS2) |
Types of NC units | FANUC 16/18/21, 0i/15i/150i, 16i/18i/21i, 30i/31i/32i, 160i/180i/210i, 300i/310i/320i series Mitsubishi MELDAS 60/60S, 70/700 series Siemens SINUMERIK 840D sl |
Measurement/ output content |
Full compliance with ISO 230-2 (1988, 2014) Various positioning accuracy inspection items, including average reversing error Various graph outputs, Formatted inspection report output (ISO/VDI) |
Correction | Pitch error and backlash error.(Automatic correction) |
Functions required by NC controller |
Programmable parameters (required for automatic correction) DNC operation mode (required for automatic operation of NC from a PC using G-codes) (If this mode is not available, the NC can operate in the memory mode and automatic measurement can be performed using data from the DISTAX counter.) |