ZEISS DuraMax®
This new measurement style breaks with conventional wisdom and achieves easy installation and transfer to the processing site.
Features
ZEISS technology concentrated in compact body
Slim and space-saving coordinate measuring machine for on-site measurement
DuraMax is a scanning coordinate measuring machine developed by concentrating ZEISS technology in a compact body.It is equipped with a high-accuracy scanning measurement function as a standard feature and uses a body structure suppressing the impact of temperature changes to achieve high accuracy, high efficiency and high environmental resistance.
Small footprint of W670 x L870 mm
It is no longer necessary to change the factory layout only for installing a coordinate measuring machine.
Cantilever-type slim design
Use of cantilever structure realized a generous measuring range of X500 x Y500 x Z500 mm, which was previously impossible for a coordinate measuring machine of this size.
Design for ultimate usability
Workpieces can be loaded in four directions, securing a wide space for operations.
Always ready for measurement only with one power source !
Measurement by installing at necessary place.
DuraMax realizes a completely new style of measurement: measurement by installing the machine wherever necessary.
As long as a 100 V power source and an area of 0.85 m2 are available, it can be installed anywhere for measurement.
Use of linear guide and linear drive mechanisms makes air supply, which is required for a typical coordinate measuring machine, unnecessary
Accuracy guarantee temperature range as wide as 18 to 30℃ enables installation with no temperature constraints
Combination with optional movable base makes it easy to change the installation location
Replacement of dedicated jigs and tools with a coordinate measuring machine
If dedicated jigs and tools are used, measurement errors caused by operators may occur, and the jigs and tools have to be fabricated whenever a new workpiece is measured, which results in high costs.On the other hand, with a coordinate measuring machine, measurement errors caused by operators can be reduced, and program creation or modification can deal with the change of workpieces to be measured. As such, the cost of re-measurement and jigs and tools can be reduced.
Related Products
.jpg)
